考慮非彈性變形的建筑結構施工模擬研究*
方 朔1，趙 昕2，郁冰泉1，伍小平3
- 摘 要
-
(1 同濟大學建筑工程系,上海 200092；2 同濟大學建筑設計研究(集團)有限公司,上海 200092;3 上海建工（集團）總公司, 上海 200050)[摘要] 施工模擬方法廣泛應用于施工階段差異變形計算、標高補償和水平度校正等方面。施工模擬主要是對施工階段結構的材料時變性和體系時變性進行模擬。建立了三層框架結構，用B3模型輔助編程，進行施工模擬計算；比較了考慮施工過程和不考慮施工過程的結構內力，比較了考慮非彈性變形和不考慮非彈性變形的結構內力。結果表明，用B3模型計算非彈性變形是可取的，既考慮非彈性變形又考慮施工過程的編程方法能很好地進行施工模擬。[關鍵詞] 施工模擬;時變性;非彈性變形;B3模型中圖分類號：TU721.1 文獻標識碼：A 文章編號：1002-848X(2013)S1-0991-04*上海市科技攻關計劃資助（編號：09dz1207704）；上海市青年科技啟明星計劃（跟蹤）資助（編號：11QH1402700）。通訊作者：方朔，Email:610640057@qq.com。Study on construction simulation of building structure considering inelastic deformationFang Shuo1, Zhao Xin2, Yu Bingquan1, Wu Xiaoping3(1 Department of Building Engineering, Tongji University, Shanghai 200092, China; 2Tongji Architectural Design (Group) Co., Ltd., Shanghai 200092, China；3Shanghai Construction Group General Co., Shanghai 200050, China)Abstract: Construction simulation method is widely used in the calculation of the differential deformation, elevation compensation and floor level correction in construction stage. Construction simulation method focuses on the simulation of time-variant properties of materials and structural systems. A three-floor frame structure is established to study construction simulation using B3 model. Internal forces of the methods with or without consideration of the construction process are compared. Internal forces of the methods with or without consideration of inelastic deformation are compared. Results show that calculating inelastic deformationwith B3 model is feasible. Programming method with considering of inelastic deformation and construction process is well applied in construction simulation.Keywords: construction simulation；time-variant properties；inelastic deformation；B3 model
