- 摘 要
-
（上海建筑設計研究院有限公司，上海 200041）
[摘要]遼寧省科技館是多功能的大型展覽館，鋼-混凝土混合框架結構，體型復雜。采用CFX軟件對其進行數值風洞模擬，得到了球體、大挑檐、幕墻的平均風壓；采用SATWE和MIDAS軟件進行整體分析，應用屈曲約束支撐調整結構整體扭轉性能，對大開洞部分進行樓板應力分析。分析結果表明，主體結構抗震性能良好，有很好的延性。
[關鍵詞] 數值風洞模擬；屈曲約束支撐；平面不規則；樓板應力分析
中圖分類號：TU318 文獻標識碼：A 文章編號：1002-848X(2013)S1-1328-07
Structure design on Science and
Zhou Yuqing, Xu Xiaoming
(Shanghai Institute of Architectural Design & Research)
Abstract: Science and Technology Museum of LiaoNing Province is a multifunction exhibition building with steel-concrete frame structure system, CFX analysis was used to numerical simulation analysis of the wind load for the data of sphere, cantilever roof and facade. SATWE and MIDAS were used in seismic calculation, buckling-restrained brace was applied to adjust the building torsion behavior, and also we made stress analysis for the slab of all floors. The results show that the main structure has sufficient seismic capacity and ductility.
