- 摘 要
-
（1 天津城建大學天津市土木建筑結構防護與加固重點實驗室， 天津 300384； 2 天津大學建筑工程學院， 天津 300072）
［摘要］通過對Z形試件進行直剪試驗，研究鋼纖維超高強混凝土的抗剪性能，著重分析了鋼纖維類型、體積率和鋼筋配箍率對鋼纖維超高強混凝土抗剪強度的影響。試驗結果表明：與螺旋鋼纖維相比，超細鋼纖維能夠更好地提高試件的抗剪強度；在合理的體積率范圍內(nèi)（超細纖維的最優(yōu)抗剪強度體積率位于0-5%～1-5%之間，而螺旋鋼纖維的最優(yōu)抗剪強度體積率位于1-5%～2-5%之間），鋼纖維超高強混凝土的抗剪強度隨著鋼纖維體積率增大而顯著增大；另外，鋼纖維超高強混凝土的延性和抗剪強度隨鋼筋配箍率的增大而顯著提高。
［關鍵詞］鋼纖維超高強混凝土； 直剪試驗； 抗剪強度； 延性
中圖分類號：TU528文獻標識碼：A文章編號：1002-848X(2016)15-0042-05
Direct shear experimental research on shear properties of steel fiber reinforced ultra high strength concrete
Zhao Yongjiao1, Liu Zhongxian1, Xu Shenchun2, Wu Pengtao1
(1 Tianjin Key Laboratory of Civil Structure Protection and Reinforcement, Tianjin ChengJian University, Tianjin 300384, China; 2 School of Civil Engineering, Tianjin University, Tianjin 300072, China)
Abstract:Shear properties of steel fiber reinforced ultra high strength concrete were investigated by direct shear tests on Z-shaped specimens, and the study emphasized on the influences of steel fiber type, volume ratio and stirrup reinforcement ratio on the shear strength of steel fiber reinforced ultra high strength concrete. The test results show that: compared with spiral steel fiber, micro steel fiber can obviously improve shear strength of specimens. Within a reasonable range of the volume ratio (regarding the shear strength, optimum volume ratio ranges 0-5% to 1-5% for micro steel fiber, and 1-5% to 2-5% for spiral steel fiber), the shear strength of steel fiber reinforced ultra high strength concrete increases significantly with the increase of steel fiber volume ratio. Additionally, the ductility and shear strength of steel fiber reinforced ultra high strength concrete also increases significantly with the increase of stirrup ratio.
Keywords:steel fiber reinforced ultra high strength concrete; direct shear test; shear strength; ductility
*天津市科技支撐計劃項目（14ZCZDSF00016），國家科技支撐計劃項目（2012BAJ07B05）。
作者簡介：趙永嬌，碩士，Email: 1143892713@qq.com。
