- 摘 要
-
（1 上海通正鋁結構建設科技有限公司, 上海 201612；2 上海建科鋁合金結構建筑研究院, 上海 201612）
［摘要］南京牛首山佛頂宮大穹頂為單層鋁合金單層網殼，采用鋁合金板式節點連接。為直觀了解節點受力性能和破壞機理，對桿件高度為550mm的足尺鋁合金網格單元試件進行試驗研究。結果表明，節點符合“強節點弱構件”的基本要求。在試驗的基礎上，采用ABAQUS及ANSYS軟件對鋁合金板式節點及鋁合金網格單元進行有限元分析，有限元分析結果和試驗現象基本一致，驗證了有限元模型的合理性與有效性。試驗與有限元模擬的對比分析結果表明，本項目采用的鋁合金板式節點在設計荷載作用下是安全和可靠的。
［關鍵詞］南京牛首山佛頂宮； 鋁合金結構； 網格單元； 板式節點； 試驗研究； 有限元分析
中圖分類號：TU395文獻標識碼：A文章編號：1002-848X(2020)11-0059-05
Experimental study and finite element analysis on the aluminum alloy gusset-type joints of the large dome in Nanjing Niushou Mountain Fo Ding Palace
LIU Xiaowei1,2, OUYANG Yuanwen1,2
（1 Shanghai Tongzheng Aluminium Structure Construction & Technology Co., Ltd., Shanghai 201612， China;2 Shanghai Jianke Aluminium Structure & Architecture Research Institute, Shanghai 201612， China）
Abstract:The large dome of Niushou Mountain Fo Ding Palace in Nanjing is a single-layer aluminum shell structure, connected by aluminum alloy gusset (AAG) joints. In order to intuitively understand the joint performance and failure mechanism of the project, a full-scale aluminum alloy grid unit test piece with a height of 550mm was experimentally studied. The test results show that the joint meets the basic requirements of “strong joint weak component”. Based on the experiments, ABAQUS and ANSYS software were used to perform finite element analysis on AAG joints and aluminum alloy grid units. The results of the finite element analysis were basically consistent with the experimental phenomena, which verified the rationality and effectiveness of the finite element model. The comparative analysis results of the test and the finite element simulation show that the AAG joint used in this project is safe and reliable under the design loads.
Keywords:Nanjing Niushou Mountain Fo Ding Palace; aluminum alloy structure; grid unit; gusset-type joint; experimental study; finite element analysis
作者簡介：劉小蔚，碩士，工程師，Email: liuxiaowei@tal-china.com。
- 下載地址
-
