- 摘 要
-
（中國建筑西南設計研究院有限公司， 成都 610042）
［摘要］科創園1號地項目由地下2或3層、地上13～19層的5棟高層辦公塔樓及裙房、6棟地上1層商業組成。建筑造型復雜，結構整體表現為上部樓層U形平面和下部樓層獨立分塊的多塔，中間6～8層采用16.8，33.6m跨轉換桁架形成回字形的強連接體?；谏鲜銮闆r，進行了包括結構單體劃分、結構布置、轉換桁架形式和位置等結構方案比選，盡可能地減少了結構超限程度； 針對存在的扭轉不規則、凹凸不規則、側向剛度突變、豎向構件間斷4項超限類型的典型超限結構單體，進行了性能化設計分析，并提出了加強措施。 結果表明，結構各階段的性能水準均能滿足設定的性能目標，抗震加強措施可靠可行。
［關鍵詞］結構方案比選； 超限分析； 大跨轉換桁架； 性能化設計
中圖分類號：TU375-5文獻標識碼：A文章編號：1002-848X(2020)19-0098-09
Schemes comparison and out-code analysis of Kechuangyuan No.1 complex structures
XIONG Yaoqing, ZHOU Jinwei, WU Xiaobin, ZHANG Linfeng, MA Yanjie, TU Yu, YAO Songbai
(China Southwest Architectural Design and Research Institute Co., Ltd., Chengdu 610042, China)
Abstract:Kechuangyuan No. 1 project is composed of 5 high-rise office towers with 2 or 3 levels basement and 13～19 floors super structure and 6 commercial buildings with 1 floor super structure. The architectural form is complex. The upper and lower floors are multi towers with U-shaped plane and independent blocks respectively. The middle 6～8 floors form a annular shaped strong connector with 16.8m and 33.6m span transfer trusses. In view of the above situation, structural schemes were compared and selected including structural monomer division, structural layout, transfer truss form and position, so as to reduce the out-code degree of structure as much as possible. In view of typical out-code structural units with four out-code types of torsional irregularity, concave convex irregularity, lateral stiffness mutation and vertical component discontinuity, the performance-based design and analysis were carried out, and strengthening measures were proposed. The results show that the performance level of each stage of the structure can meet the set performance objectives, and the seismic strengthening measures are reliable and feasible.
Keywords:comparison of structure schemes; out\|code analysis; large-span transfer truss; performance-based design
作者簡介：熊耀清，博士，高級工程師，一級注冊結構工程師，Email：82023350@qq.com。
